Samsung SGH-Z720 Service Manual page 30

20
< Conduction Tape >
Conduction Tape Attachment
- Attach the conduction tape like a picture.
22
< Close the Key-FPCB Connector >
Assembly
Key F-PCB
1. Put the PBA on the FRONT.
2. Close the Key - FPCB connector.
24
1
4
Assembling the Rear
- Put this on the screw JIG and then drive the
Screw in order.
→ SCREW SIZE:1.4*4.0*2.5
3
2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View/Disassembly&Assembly Instructions
21
< FPCB Connector Assembling >
PBA Assembly
1. Open the slide ASS'Y only half and then put
the PBA on the PBA JIG.
2. drive the slide FPCB connector.
23
Insert the Camera Key
Camera key Assembly
- Insert the camera key into the hole.
25
Insert the left
screw cap
Rear Screw Cap Insertion
1.Insert the screw cap of left side.
2.Insert the screw cap of right side.
3. Press the screw caps by using screw cap JIG.
5-15
< Camera Key Assembling >
Insert the left
screw cap