Samsung SGH-Z720 Service Manual page 26

5
< Untied- Prevention Tape >
Untied - Prevention Tape Attachment
- Attach the untied - prevention tape within the
silk line.
7
Remove the
paper
Fold it up
Slide FPCB Assembly
1. Remove the protection paper from the double fixing tape of slide FPCB.
2. Insert the slide FPCB into the connector within the silk guide line on PBA.
3. Hook up the connector.
4. Attach the insulating tape to prevent the loosing of connector within the silk guide line.
5. Fold up the edge by using your fingers.
※ Attach the untied - prevention tape without bubble.
※ Attach the extraneous matters at the right position within guide line.
Attach the insulating tape
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View/Disassembly&Assembly Instructions
6
Conduction Tape
Conduction Tape Attachment
- Attach the conduction tape on the two points
of slide FPCB.
5-11
Guide
line
Check the silk line
Lock the connector