Listening To Radio; Setting Mono/Stereo; Presetting Stations - Samsung HT-E321 User Manual

Basic Functions
DSP (Digital Signal Processor)/EQ
• DSP (Digital Signal Processor) : DSP modes have
been designed to simulate different acoustic
environments.
• EQ : You can select POPS, JAZZ , ROCK, or USER
to optimize the sound for the genre of music you are
playing.
Press the DSP/EQ button.
POPS, Select POPS, JAZZ, or ROCK,
JAZZ, depending on the genre of music
ROCK you're listening to.
You can enjoy music as you set in
"EQ:USER ".
If you press ENTER in the "EQ:USER"
USER
menu, you will see a window where you
can change the EQ settings to your
preference.
Provides a sense of presence as if in a
STUDIO
studio.
Simulates the sound of a dance club
CLUB
with a throbbing bass beat.
Provides a clear vocal as if listening in a
HALL
concert hall.
MOVIE Provides the feeling of a movie cinema.
Provides the feeling of being in a
CHURCH
grand church.
OFF Select this for normal listening.
✎
NOTE

The DSP/EQ function is only available in Stereo
mode.

The DSP/EQ function is not available while
playing AC3 signal in 2.1 channel mode.
28
English
Using buttons on the Remote Control
1. Press the FUNCTION button to select FM.
2. Tune in to the desired station.
• Preset Tuning 1 : You must first add a desired
frequency as a preset. Press the STOP () button
DSP /EQ
to select PRESET and then press the TUNING/
CH (
• Manual Tuning : Press the STOP () button to
select MANUAL and then press the TUNING/CH
( ) button to tune in to a lower or higher
frequency.
• Automatic Tuning : Press the STOP () button to
select MANUAL and then press and hold the
TUNING/CH (
search the band.

Setting Mono/Stereo

Press the MO/ST button.
• Each time the button is pressed, the
sound switches between STEREO and
MONO.
• In a poor reception area, select MONO
for a clear, interference-free broadcast.

Presetting Stations

Example : Presetting FM 89.10 in the memory
1. Press the FUNCTION button to select FM.
2. Press the TUNING/CH (
<89.10>.
3. Press the TUNER MEMORY button.
• Number flashes on the display.
4. Press the TUNING/CH (
to select preset number.
• You can select between 1 and 15 presets.
5. Press the TUNER MEMORY button again.
• Press the TUNER MEMORY button before
number disappears from the display.
• Number disappears from the display and the
station is stored in memory.
6. To preset another station, repeat steps 2 to 5.

Listening to Radio

) button to select the preset station.
) button to automatically
) button to select
) buttons