― Assembly
1
1) Insert a CON TO CON.
2) Insert a Camera into the Connector.
1) Be careful not to make scratch and molding damage!
1) Assemble from the upper side of the
3
FOLDER UPPER.
1) Be careful not to make scratch and molding damage!
Make a checking on the TORQUE (1.3 ± 0.1 Kgf·Cm)
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
Exploded View/Disassembly&Assembly Instructions
1) Align and place a LCD on a FOLDER LOWER.
2
2) Insert a SPK and a Motor.
3) Insert a Camera.
★Emphasis★
Insert Spk
※
from lower
Side
1) Be careful not to make scratch and molding damage!
2) Insert Spk from lower side.
3) Push the camera until it is inserted completely.
4) Protect Camera Lense from dust.
1) Screw down and attach the SCREW SHEET
4
Torque : 1.2± 0.1 Kgf/㎠
1) Be careful not to make scratch and molding damage!
5-7
★Emphasis★