Software Upgrade - Samsung UD22B User Manual

7
Setup

7.11.8 Software Upgrade

Performs a software upgrade.
1
Connect the product to a computer via a digital signal such as
file converted from an SW code. The image below will appear on the screen of the product.
2
While a BMP image onto which the software code has been converted is displayed on the screen,
select Software
When there are two or more BMP images, they are displayed on the screen using a slideshow.
It is recommended that the playback interval between two BMP images in the slideshow should

be one second. The image extraction probability will decrease with other playback intervals.
A BMP image might not be extracted if it is covered by another image (for example, the

mouse pointer).
3
If a more recent version than the current software version is detected, you will be asked whether to
upgrade the current software. If you select <Yes>, the upgrade is performed.
4
When the software upgrade is completed, the product is turned off and on automatically.
This only operates with a digital signal, such as in DVI,

must be identical to the panel resolution.)
In

Edit Name
This is only supported if the

Upgrade.
HDMI modes, the timing values used for both the PC and product are only supported if the
is set to PC or DVI
Size
DVI
HDMI
PC.
is set to 16:9.
or HDMI. Click the BMP image
mode. (The input resolution
7 Setup
122