Switching Between Calls - Samsung Galaxy Note User Manual

Speaker: routes the phone's audio through either the speaker or through
•
the earpiece.
– Tap Speaker to route the audio through the speaker. (You can adjust the
speaker volume using the volume keys.) A green line will appear under
the Speaker button.
– Tap Speaker again to use the phone's earpiece (see "Using the
Speakerphone During an Active Call" on page 47). The green line
will turn grey when Speaker is not activated.
Mute: turn the onboard microphone either on or off.
•
– Tap Mute during a call to mute the microphone. A green line will appear
under the Mute button.
– Tap Mute again to unmute the microphone. The green line will turn grey
when Mute is not activated.
Headset: connects to a Bluetooth headset.
•
– Tap Headset during a call to activate a Bluetooth headset. A green line
will appear under the Headset button.
– Tap Headset again to de-activate the Bluetooth headset. The green line
will turn grey when the Headset is not activated.
Press for more options:
•
– Contacts: allows you to go to your Contact list.
– Memo: allows you to jot down a memo during a call.
– Noise suppression on/off: allows you to turn on the Noise Suppression
feature when you are in a noisy area. Turn it Off when not needed to
conserve battery power.
45
Placing a Call on Hold
You can place the current call on hold at any point during a
conversation. You can also make another call while you have a
call in progress if your network supports this service.
While on a call, tap Hold
1.
current caller on hold (which is displayed on-screen as a
greyed-out box).
You can later reactivate this call by tapping Unhold.
2.
To make a new call while you have a call in progress
Tap Hold .
1.
Tap Add call to display the dialer.
2.
Enter the new number and tap
3.
Once connected, the active call will appear in a large box at
the top of your screen and the call on hold will appear in a
small box below.

Switching Between Calls

When you have an active call and a call on hold, you may switch
between the two calls, changing the one on hold to active and
placing the other on hold.
Tap Swap.
1.
. This action places the
.