Samsung SGH-D840 Service Manual page 22

5
< UPPER wall>
< KEY PAD >
1) Put the sponge guide on slide upper.
2) And put the Tape LCD FPCB on sponge
guide to guide.
7
1) Fasten a screw at 4 points with driver
after slide up.
This Document can not be used without Samsung's authorization
< SPONGE GUIDE >
SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly instructions
6
1) Fold LCD FPCB like a picture
2) And insert other side to front-rear hole.
3) Verify the FPCB size.
8
1) Put the 2 kind of screw caps on screw
hole.
5-6