Table of Contents
Advertisement
Disassembly and Assembly instructions
5
1) Remove the insulation tape.
2) And separate LCD connector from Main-
PBA by removing soldering points.
7
1) Loosen a screw 4 point form Lower.
2) Make the space between slide upper and
slide lower using assembly stick.
3) And separate slide upper and lower.
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
6
1) Open the slide. (Slide up)
2) Remove the 2 screw caps with pinset.
8
1) At first remove the EMI tape from sub-PBA.
5-5
Advertisement
Table of Contents
