Table of Contents
Advertisement
5
Construct Upper Case Ⅱ
Check the connection
of Hooks
1) Construct Left and Right Hook.
2) Check all connection of Hooks.
(Be careful about scratch and damage)
7
Construct Front Case
Push Hinge of Upper
ASSY with a tool whcih
is not sharp and put
together Front Case
and Upper ASSY.
1) Don't tear the FPCB.
(Be careful about scratch and damage)
This Document can not be used without Samsung's authorization
Put the FPCB into the
groove of Front CAse.
SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly Instructions
6
Construct Upper Case Ⅲ
1) Tighten two SCREWS.
2) Put on two SCREW COVER.
(Be careful about scratch and damage)
8
Put on the Key Pad
1) Install Key Pad. Check PAD Holder located at the
correct position.
(Be careful about scratch and damage)
11-5
Advertisement
Table of Contents
