Table of Contents
Advertisement
6-2. Assembly
1
1) Solder SPEAKER & MOTOR to LCD.
2) Bond on the soldering place
※ caution
1) Be careful not to make scratch and
molding damage!
3
1)Attach LCD connector rubber.
2)Assemble FPCB hole cover.
※ caution
1. Arrange the motor wire after assembling
the speaker.
2. First assemble the motor wire, next the
speaker wire.
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly instructions
2
1) Insert FPCB into FOLDER LOWER.
2) Assemble "Con to Con" to LCD
3) Attach Speaker and Motor.
※ caution
1) Be careful not to make scratch and
molding damage!
2) Be careful not to damage LCD FPCB!
4
<1>
<2>
1) Assemble FOLDER UPPER with FOLDER
LOWER following the orders as above
picture is shown.
※ caution
1) Be careful not to make scratch and
molding damage!
6-3
Twist the wire two
and half times
Arrange Wires
clearly on SPEAKER
and MOTOR !
<3>
Advertisement
Table of Contents
