Adjusting The Volume; Viewing The Display; Viewing The Menus - Samsung 5 series User Manual

Using the Button
The button is used to select stations that broadcast a digital signal.
1.
For example, for Channel 7-1, press 7, then
HD indicates the TV is receiving a Digital High Definition signal.
➣
SD indicates the TV is receiving a Standard Definition signal.
For quick channel change, press the number buttons, then press the
➣
ENTER button.
Using the PRE-CH Button to select the Previous Channel
1.
Press the PRE-CH button. The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one
➣
channel, then use the number button to select the second channel.
Then use the PRE-CH button to quickly alternate between them.

Adjusting the Volume

Using the Volume Button
1.
Press the VOL – or VOL + button to increase or decrease the volume.
Using the MUTE button
At any time, you can cut off the sound using the MUTE button.
1.
Press MUTE button and the sound cuts off.
" " is displayed on the screen.
2.
To turn mute off, press the MUTE button again or simply press the
VOL – or VOL + button.

Viewing the Display

The display identifies the current channel and the status of certain audio-video
settings.
1.
Press the INFO button on the remote control.
The TV will display the channel, the type of sound, and the status of certain
picture and sound settings.
Press the INFO button once more or wait approximately 10 seconds and
➣
the display disappears automatically.

Viewing the Menus

1.
With the power on, press the MENU button.
The main menu appears on the screen.
The menu's left side has icons: Picture, Sound, Channel, Setup, Input,
Application.
2.
Press the ▲ or ▼ button to select one of the icons.
Then press the ENTER
3.
Press the EXIT button to exit.
The on-screen menus disappear from the screen after about one minute.
➣
, then 1.
button to access the icon's sub-menu.
English - 14
TV #8
Sun, Sep  1:4 pm
Life On Venus Avenue
DTV Air Dolby Digital
9:59 am - 10:59 am
4-2
♥
No Detaild Information
Mode : Standard
Backlight : 7
Contrast : 95
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Detailed Settings
1080i | 16:9 | English