Table of Contents
Advertisement
Connections
Wireless Network
You can connect to the network with a Wireless IP sharer.
1.
A wireless AP/IP router is required to make a wireless network connection. Connect the wireless
LAN adapter to the Wireless LAN Adapter on the rear panel of the product.
2.
Set the network options. (See page 40)
Broadband
service
Wireless IP sharer
PC
✎
NOTE
This product is compatible with only Samsung's Wireless LAN Adapter. (not supplied) (Model name: WIS09ABGN).
- The Samsung Wireless LAN Adapter is sold separately. Contact a Samsung Electronics retailer for purchasing.
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the
wireless network.)
Wireless LAN, by its nature, may cause interference, depending on the use condition (AP performance, distance, obstacles,
interference by other radio devices, etc).
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
When applying the security key for the AP (wireless IP sharer), only the following is supported.
1)
Authentication Mode : WEP, WPAPSK, WPA2PSK
2)
Encryption Type : WEP, AES
For the AllShare function, a PC must be connected in the network as shown in the fi gure.
Attaching the Toroidal Ferrite Core to the Speaker Cables of the Main Unit
If you attach a Toroidal ferrite core to the Speaker Cables of the man unit, it will help to prevent
RF interference from radio signals.
1.
Pull the fi xing tab of the Toroidal ferrite core to open it.
2.
Make a loop once in the Speaker Cables.
3.
Attach the Toroidal ferrite core to the Speaker Cables of the Main Unit as the fi gure shows and press it until
it clicks.
28
English
Networking with PC for
AllShare function
(See pages 63~64)
SPEAKER IMPEDANCE : 3
HDMI OUT
HDMI OUT
HDMI OUT
WIRELESS LAN
WIRELESS LAN
FM ANT
WIRELESS
iPod
LAN
LAN
COMPONENT OUT
COMPONENT OUT
AUX IN
AUX IN
VIDEO OUT
VIDEO OUT
Wireless LAN
Adapter
(not included)
Hide quick links:
Advertisement
Table of Contents
