Disassembly and Assembly Instructions
5
1) Put the two SCREW CAPs out.
2) Detach the HINGE DUMMY out.
2) Unscrew 2 points.
※ Caution
1) Be care of scratch and molding damage.
Separate a motor/speaker/camera
7
from the LOWER using a tweezer.
Separate the LCD module from the LOWER.
※ Caution
1) Be care of scratch and molding damage.
2) Be care of damage to motor/speaker wires.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
6
1) Disassemble the UPPER by using a
assembly stick.
※ Caution
1) Be care of scratch and molding damage.
8
Take the LCD out.
※ Caution
1) Be care of scratch and molding damage.
2) Be care of damage to LCD FPCB..
11-2