Table of Contents
Advertisement
Exploded view and Part List
5
가.Insert the top of the SHIELD CAN obliquely.( 45°)
→ When inserting, check the condition of the KEY PAD Basefilm .
나.Combine the bottom hole of the SHIELD CAN and FRONT SCREW boss.
다.After Combining, check the KEY GAP of the PAD.
1) After Combining FRONT and SHIELD CAN, open the FOLDER and check the KEY PAD of the GAP.
6
1) Adhere the Mic insulation TAPE to SHIELD CAN along metallized SHIELD CAN.
2) After put the ANT on the FRONT, screw ANT.
3) Put the ANT CABLE through the passage of FRONT.
4) Don't keep being shown the Ant Cable after adhering Ant TAPE.
1) Attach tape by Guide line.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Insert the
Blue
marked
part of the SHIELD CAN
under the
Red
marked of
the FRONT HOOK.
3-8
Advertisement
Table of Contents
