Table of Contents
Advertisement
3-4. Assembling Manual
1
1) Solder the MOTOR WIRE after positioning it on the MOTOR PAD.
1) Take care of soldering correct.
2) Don't touch the LCD component and LCD DATA LINE with a
hot iron carefully.
3
1) Take off SPK ASS'Y's tape, .
2) Press the SPK ASS'Y의 KEY DOME with a hand.
3) Attach the sponge on the MP3 KEY DOME correctly.
1) Attach KEY PCB on the a rising correctly.
2) Be careful the sponge of dust.
4
1) Insert SPK ASS'Y F-PCB F-PCB in the Connector.
2) Bond the solder part with receiver wire of the end.
1) Insert SPK ASS'Y F-PCB in the Connector. (By Silk Base Line)
2) Do not bond too much and control the amount of bond not to be high.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
1) Insert MEGA CAMERA F-PCB in the Connector.
2) Insert SUB CAMERA F-PCB in the Connector.
1) Insert CAMERA F-PCB in the Connector.
(By Silk Base Line)
2) Be careful F-PCB CRACK.
After bonding, handling the dust
direction
3-7
Exploded view and Part List
Advertisement
Table of Contents
