Samsung SGH-F210 Service Manual page 37

7-2. Assembly
1
※ caution
1. Connect the MAIN FPCB on the LCD ASS'Y.
3
1) Remove tape
2) Check whether hole of bracket and hole of PCB
are aligned.
※ caution
1. Remove the tape of the bracket.
2. Land wheel key ASS'Y according to PCB hole,
folding sub-PCB.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
1) Insert by the shown guide line.
※ caution
1. Insert the wheel key ASS'Y according to guide
line
2. Fix it by locker after inserting connector.
3. Put the tape on the locker to fix locker.
4
1) When speaker is landed, move the wire to the
lower part of PCB not to damage.
2) When motor is landed, be cautious not to insert
wire under the motor.
※ caution
1. Land the speaker at upper part.
2. Land the motor at upper part.
7-5
Exploded View and Parts List