7. Disassembly and Assembly Instructions
7-1. Disassembly
1
※ caution
1. Remove a screw at six points as shown.
3
1) Be cautious not to damage FPCB and connector
※ caution
1. Remove a hold key and a volume key as
shown.
2. Separate the camera connector
3. Separate the camera from the camera housing.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
1) Be cautious not to damage the rear cover
※ caution
1. Make space between rear cover and front cover
from the lower part of set, by assembly stick.
4
1) Be cautious not to damage FPCB and connector
※ caution
1. Separate the 3*4 key connector from the board
2. Separate the LCD connector from the board.
7-1