Picture Options - Samsung 4 series User Manual

natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain : Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default
settings.
Flesh Tone : Emphasize pink "flesh tone".
■
Edge Enhancement (Off / On)
■
boundaries.

Picture Options

O
MENU m → Picture → Picture Options →
ENTERE
✎
In PC mode, you can only make changes to the
Tone, Size and Auto Protection Time.
Color Tone
Size
Digital Noise Filter
MPEG Noise Filter
HDMI Black Level
POWER
P
Film Mode
Auto Protection Time
Color Tone (Cool / Normal / Warm1 / Warm2)
■
✎
Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
✎
Settings can be adjusted and stored for each
external device connected to an input on the TV.
Size : Your cable box/satellite receiver
■
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide
mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
FAV.CH
4:3: Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time, traces
of borders displayed on the left, right and center
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
S.MODE
GUIDE
: Emphasize object
Picture Options
: Normal
: 16:9
: Auto
: Auto
: Normal
: Off
: 2 hours
U Move E Enter R Return
MTS
CC
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are input.
✎
NOTE
x
After selecting
1. Press the ► button to select Position.
2. Press the ENTERE button.
3. Press the ▲or ▼button to move the
picture up or down.
4. Press the ENTERE button.
5. Press the ► button to select Reset.
6. Press the ENTERE button.
x
After selecting Screen Fit in HDMI (1080i / 1080p)
or Component (1080i / 1080p) mode: Adjusts the
Position or Size by using ▲, ▼, ◄ or ► button.
x
Color
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
x
Settings can be adjusted and stored for each external
device you have connected to an input on the TV.
►
Input Source
ATV, AV,
Component (480i, 480p)
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
PC
Digital Noise Filter (Off / Low / Medium / High / Auto
■
/ Auto Visualization ): If the broadcast signal received
by your TV is weak, you can activate the Digital Noise
Filter feature to reduce any static and ghosting that may
appear on the screen.
✎
When the signal is weak, try other options until the
best picture is displayed.
Auto Visualization : When changing analog channels,
displays signal strength.
✎
Only available for analog channels.
✎
When bar is green, you are receiving the best
possible signal.
MPEG Noise Filter (Off / Low / Medium / High /
■
Auto): Reduces MPEG noise to provide an improved
picture quality.
✎
Disabled under PC mode.
HDMI Black Level (Normal / Low)
■
level on the screen to adjusts the screen depth.
✎
Available only in HDMI mode (RGB signals).
Film Mode (Off / Auto1 / Auto2)
■
automatically sense and process film signals from all
sources and adjusts the picture for optimum quality.
✎
Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
Auto Protection Time (2 hours / 4 hours / 8 hours
■
/ 10 hours / Off): If the screen remains idle with a still
image for a certain period of time defined by the user,
the screen saver is activated to prevent the formation of
ghost images on the screen.
Zoom1, Zoom2 or Wide Fit:
Picture Size
16:9, Zoom1,
Zoom2, 4:3
16:9, 4:3, Wide Fit,
Screen Fit
16:9, 4:3
: Selects the black
: Sets the TV to
English
15