Table of Contents
Advertisement
6-7 Test Command Table
Command No.
Command SW Name
(OP, AB, RB)
01(1F, 0, 0)
T_SUSPEND_I
02(3F, 0, 0)
T_RESTART_I
03(FD, 0, 0)
T_SAVE_VAL_I
04(1D, 0, 1)
T_GET_MODE_I
05(1C, 1, 0)
T_SET_MODE I
06(1E, 0, 0)
T_WRITE_NV_I
07(81, 0, 0)
T_CARRIERON_I
08(82, 0, 0)
T_CARRIEROFF_I
09(83, 4, 0)
T_LOADSYN_I
10(84, 1, 0)
T_PWRLEVEL_I
11(85, 0, 0)
T_RXMUTE_I
12(86, 0, 0)
T_RXUNMUTE_I
13(87, 0, 0)
T_TXMUTE_I
14(88, 0, 0)
T_TXUNMUTE_I
16(8F, 0, 0)
T_STON_I
17(90, 0, 0)
T_STOFF_I
22(91,96,96)
T_SNDNAM_I
23(95, 3, 4)
T_SNDVERSION_I
24(9F, 7, 8)
T_SNDESN_I
25(92, 0, 0)
T_BACKLIGHT_ON_I
26(93, 0, 0)
T_BACKLIGHT_OFF_I
27(96, 0, 0)
T_LAMP_ON_I
28(97, 0, 0)
T_LAMP_OFF_I
29(9A, 5, 0)
T_REBUILD_I
30(9D,16, 0)
T_PLINE_I
32(A0, 1, 0)
T_SATON_I
33(A1, 0, 0)
T_SATOFF_I
34(A2, 0, 0)
T_CDATA_I
35(A3, 0, 0)
T_VOLUME_UP_I
36(A4, 0, 0)
T_VOLUME_DOWN_I
38(A6, 3, 0)
T_VOC_ENC_OFFSET_I
39(A7, 3, 0)
T_VOC_DEC_OFFSET_I
Samsung Electronics - Contents may change without notice.
Terminate the normal mode, enter to the test mode.
Terminate the test mode, enter to the normal mode.
Save value in EEPROM. (Only for Auto test)
Get mode. (CDMA or FM)
Return value '0' is FM mode, '1' is CDMA mode.
Set mode to CDMA or FM. (Only for Auto test)
'0' is FM mode, '1' is CDMA mode.
Write an EEPROM item. (one of the NV items)
Turn the carrier on.
Turn the carrier off.
Set the synthesizer to the channel specified by ch_ data.
2)
Set the RF power attenuation to the value specified.
2)
Mute the receive-audio signal.
Unmute the receive-audio signal.
Mute the transmit-audio signal.
Unmute the transmit-audio signal.
Transmit a continuous Signaling Tone (ST).
Stop transmit a continuous Signaling Tone.
Display and send NAM information.
1)
Display and return S/W version.
1)
Display and return ESN.
1)
Turn on the backlight.
Turn off the backlight.
Turn on the LAMP.
Turn off the LAMP.
Rebuild EEPROM.
Display and return production date.
Enable the transmission of SAT.
2)
Disable the transmission of SAT.
Transmit continuous 5-word Reverse CTL CH message.
Increase value of the last command. (Only for autotest)
Decrease value of the last command. (Only for autotest)
Vocoder ENC offset.
Vocoder DEC offset.
Description
Circuit Description
6-11
Advertisement
Table of Contents
