Setting Up The Tv With Your Pc - Samsung 3 series User Manual

Setting up the tV with your PC

¦
Preset: Press the SOURCE button to select PC mode.
N
Auto Adjustment
❑
Use the Auto Adjust function to have the TV set automatically adjust the video signals it
receives. The function also automatically fine-tunes the settings and adjusts the frequency
values and positions.
Press the tOOLS button to display the tools menu. You can also set the Auto
T
Adjustment by selecting Tools → Auto Adjustment.
This function does not work in DVI-HDMI mode.
N
Screen
❑
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone,
then make the vertical frequency adjustments on your PC and fine tune again. After the noise has been reduced, re-adjust the
picture so that it is aligned on the center of the screen.
Coarse / fine

The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone,
then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture
so that it is aligned on the center of screen.
PC Position

Adjust the PC's screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position. Press
the ◄ or ►button to adjust the Horizontal-Position.
Image Reset

You can replace all image settings with the factory default values.
English - 0
tV Picture
Mode : Standard

Picture
Backlight
Contrast 95
Sound
Brightness 5
Sharpness 50
Channel
Auto Adjustment
Screen
Advanced Settings 
Setup
Picture Options

Reset : OK

Input
UMove EEnter RReturn
8