S/W Downloader Program - Samsung SGH-Z400 Service Manual

Array course control

4-3. S/W Downloader Program

1. Boot the Z400 by pressing 'Power ON key' + 'Number 9 key' at the same time-
If you do properly, you can see the following message on sub LCD "SGH-Z400
DOWNLOAD"
2. Load the binary download program by executing the
"FastMultiLoader
And then Check the SMP6275.
V3.22.exe".
3. Select the check box what you want to download.
4-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization