Table of Contents
Advertisement
Disassembly and Assembly instructions
5
FRONT HOLE TAPE
1. Set the FRONT HOLE TAPE at the line
2. Set the F-PCB GASKET TAPE
2. Put the KEY PAD
※ caution
1. No scratch
2. The tapes are proper place.
3. key pad does not get loose
7
1. Assemble the REAR ASS'Y from the upper Hook
2. Tighten REAR SCREW (4 POINT)
HOLE
※ caution
1. No Scratch.
2. Check there is no gap
This Document can not be used without Samsung's authorization
EMI TAPE
SAMSUNG Proprietary-Contents may change without notice
6
LCD CONN
1.PUT the PBA after Air Blow
2.Connect LCD CONN
※ caution
1. Take care the components on the board
2. Check the LCD CON is conformed
3. No dust should be inside.
8
6-4
Advertisement
Table of Contents
