Epson TM-T81 Technical & Specifications Manual page 33

Confidential
The commands listed below in the first column are defined as "obsolete commands" in the ESC/POS
command system.
commands. However, the upward-compatible commands are recommended for use.
Partial cut (one point left uncut)
ESC i
ESC m Partial cut (three points left uncut)
Transmit peripheral device status
ESC u
Transmit paper sensor status
ESC v
Print NV bit image
FS p
Define NV bit image
FS q
Print raster bit image
GS v 0
NOTE: "Obsolete commands" are commands that are supported by legacy models; however it is
recommended to replace them with upward-compatible commands, because they will not be
supported in the future products.
EPSON
This printer supports both upward-compatible commands and obsolete
Obsolete command
TITLE
TM-T81
Specification
(STANDARD)
Upward-compatible command
GS V
GS V
GS r
GS r
GS ( L <Function 69>
GS ( L <Function 67>
GS ( L <Function 112 + 50>
SHEET NO
REVISION
NEXT
A
24
®
SHEET
23