Table of Contents
Advertisement
Options Available in the Auto Shooting Menu
In A (auto) mode, the following options can be
changed.
On the A (Auto) mode shooting screen M Tap the d tab (A11)
Option
A Image mode
q/s/r Touch
shooting
X ISO sensitivity
V Continuous
W White balance
C
Features That Cannot Be Used Simultaneously
Some functions cannot be used with other menu options (A66).
Allows you to select the combination of image size and
image quality used when saving images (A64).
The default setting is x
This setting is applied to other shooting modes.
Select between Touch shutter (default setting), which
allows you to release the shutter by tapping the monitor,
Touch AF/AE, which allows you to set the focus area by
tapping the monitor, and Subject tracking, which
moves the focus area to track the registered subject.
Higher ISO sensitivity allows you to take pictures of darker
subjects. Additionally, even with subjects of similar
brightness, images can be taken at faster shutter speeds,
and blurring caused by camera shake and subject
movement can be reduced. When ISO sensitivity is set to
Auto (default setting), the camera sets the ISO sensitivity
automatically.
Allows you to select from continuous settings of Single,
Continuous, BSS (A47), or Multi-shot 6. The default
setting is Single (i.e., only one image is captured at a
time). In Continuous, while the shutter-release button is
held down, up to 6 images are taken at a rate of about 0.9
frames per second (fps) when Image mode is set to
x
2×
64.
Allows you to adjust the colors in the image to suit the
light source, which can make colors appear as they do to
the eye. Although Auto (default setting) can be used
under most types of lighting, white balance can be
adjusted to suit the sky conditions or light source and
achieve more natural color tones in the image.
Set the flash mode (A55) to c (Off) when white
balance is set to any setting other than Auto and Flash.
Description
2×
64.
Using A (Auto) Mode
A
64
E35
E42
E43
E44
39
Advertisement
Table of Contents
