Motorola DROID X User Manual page 41

Connect new devices
Note: This feature requires an optional accessory.
To connect with a new device, you need to pair with it.
You only need to do this once for each device—to
connect again, just turn on the device.
1 Make sure the device you are pairing with is in
discoverable mode.
Note: Refer to the guide that came with the device
for details.
Settings
2 Press Menu >
Bluetooth settings
>
Bluetooth
3 Touch to turn on and scan. If Bluetooth
power is already on, touch
4 Touch a device to connect.
OK
5 If necessary, touch
0000
(like ) to connect to the device. When the
device is connected, the Bluetooth indicator
appears in the status bar.
Note: Using a mobile device or accessory while
driving may cause distraction and may be illegal.
Always obey the laws and drive safely.
Note: The Bluetooth Enhanced Audio setting is not
recommended for older Bluetooth headsets, as it may
not deliver acceptable sound quality.
Wireless & networks
>
.
Scan for devices
.
, or enter the device passkey
Reconnect devices
To automatically reconnect your phone with a paired
device, simply turn on the device.
To manually reconnect your phone with a paired
device, touch the device name in the
devices
list.
Disconnect devices
To automatically disconnect your phone from a paired
device, simply turn off the device.
To manually disconnect your phone from a paired
device, touch the device name in the devices list, then
Disconnect
press Menu >
Edit properties
Settings
Press Menu >
Bluetooth settings
> >
OK
and touch .
Bluetooth
.
Wireless & networks
>
Device name
. Enter a name
Bluetooth® wireless 39