Installation Instructions Installation Instructions Ventilating To ensure adequate ventilation for your refrigerator see recommended cabinetry dimensions below. The refrigerator should be positioned 50mm from each wall, and have clear space 50mm above the top of the unit. Power Supply To ensure that the appliance is not accidentally switched off, connect your refrigerator to its own power point.
Page 4
Installation Instructions Installation Instructions Protection From Heat Your refrigerator should not be located in direct sunlight or next to any heat generating appliance such as a cooktop, oven or dishwasher. Positioning Only install this refrigerator on a stable, flat floor and should it not be laid on soft materials such as foam, plastic.
This will be evaporated during the defrost cycle and will be collected in the drain pan above the compressor. If the power supply cord is damaged, it must only be replaced by your Haier Appliances Authorised Repairer because special purpose tools are required.
Page 7
The refrigerator should be cleaned and maintained once a month. When moving or cleaning, make absolutely sure that the power plug is first disconnected from the power outlet. Wipe the inner and outer surface of the refrigerator and its accessories with a damp cloth.
Page 9
For detailed technical specifications, please refer to the name plate at the back of the refrigerator.. Specifications are subject to change without prior notice.