Haier HWD1600BW User Manual page 30

moVing or storagE prECautions
• Unplug the electrical cord from the wall outlet.
• Turn off the water supply faucets.
• Disconnect the water hoses and place them in the washtub.
• Remove the drain hose from the drain and snap it back into the clips located on the
back of the washer.
• Retract adjustable feet. Loosen locking nuts as far as possible and thread feet into
the cabinet as far as possible.
• Reinstall the transportation hardware as shown below. Install the Transportation
Bracket with the original four screws, before inserting the top transportation bolt.
Remove the
back plate
28
Position the
rubber spacers
Insert the bolts
and tighten
with wrench
Replace the
back plate