Problem Solving Checklist - Haier JC-110GD Installation Instructions & User Manual

Problem solving checklist

Problem solving checklist
If there is a problem with your appliance, please check the following points before contacting
your local Haier Appliances Dealer or Authorised Service Agent or Customer Care Centre.
Problem
Wine Cellar does not
operate
Wine appears too warm
Wine temperature
is too cold
Motor operates
for long periods
Moisture build up on
interior or exterior
surface of the Wine Cellar
Wine Cellar door does not
shut properly
12
Possible causes
No electricity at the
power outlet
Temperature setting
not correct
Frequent door
openings
Large amount of wine
bottles added
Temperature setting
not correct
Hot weather
Frequent door
openings
Temperature setting
too low
Door not sealed
properly
Not unusual during
periods of high
humidity
Prolonged or frequent
door openings
Cabinet not positioned
stable or level
Door obstruction
What to do
Check that the Wine Cellar is correctly
connected and power switched on
Check another appliance at the same
outlet
Check house fuse
Adjust temperature control to colder
setting
Minimise door openings to allow
temperature to stabilise
Allow time for recently added wine to
reach desired temperature
If temperature control setting is too
cold, adjust to a warmer setting
Minimise door openings to allow
temperature to stabilise
Doors may have been opened
frequently or for an extended period
of time
The running time of the motor is
a ected by the temperature setting
chosen. Refer to the Temperature
Control or Wine Storage sections for
optimal temperature settings.
Check that the gasket is sitting at
and sealing tightly
Wipe dry, or activate the condensation
control function
Minimise door openings to allow the
temperature to stabilise. Also check
that the gasket is sitting at and
sealing the door tightly.
Level the Wine Cellar
Check for obstructions e.g. wine
bottles, shelves