Remote Start Ready; To Cancel A Remote Start - GMC 2011 Yukon Denali Owner's Manual

To cancel a remote start:

Aim the RKE transmitter at the
vehicle and press
parking lamps turn off.
Turn on the hazard warning
flashers.
Turn the ignition on and then
back off.
The vehicle can be remote started
two separate times between driving
sequences. The engine will run for
10 minutes after each remote start.
Or, you can extend the engine run
time by another 10 minutes within
the first 10 minute remote start time
frame, and before the engine stops.
For example, if
pressed again after the vehicle has
been running for five minutes,
until the
10 minutes are added, allowing the
engine to run for 15 minutes.
The additional 10 minutes are
considered a second remote
vehicle start.
Once two remote starts, or a single
remote start with one time extension
has been done, the vehicle must be
started with the key. After the key is
removed from the ignition, the
vehicle can be remote started again.
The vehicle cannot be remote
started if the key is in the ignition,
the hood is not closed, or if there
is an emission control system
malfunction and the check engine
light is on.
Keys, Doors and Windows
Also, the engine will turn off during a
and then are
remote vehicle start if the coolant
temperature gets too high or if the
oil pressure gets low.

Remote Start Ready

If your vehicle does not have the
remote vehicle start feature, it may
have the remote start ready feature.
This feature allows your dealer to
add the manufacturer's remote
vehicle start feature.
See your dealer if you would like to
add the manufacturer's remote
vehicle start feature to your vehicle.
2-7