Installing and removing the MicroSD card
To release the microSD card holder, slide it in the direction of the
arrow and lift it. Then insert the microSD card with the golden contact
downward. Finally, turn down the microSD holder and slide it in the
opposite direction to lock it.
MicroSD card may cantain user manual and some third party
applications.
Installing or removing the battery
•
Insert and click the battery into place, then close the phone cover.
•
Unclip the cover, then remove the battery.
15
Charging the battery
Connect the battery charger to your phone and mains socket
respectively.
•
Charging may take about 20 minutes to start if the battery is flat.
•
Be careful not to force the plug into the socket.
•
Make sure the battery is correctly inserted before connecting the
charger.
•
The mains socket must be near to the phone and easily accessible (avoid
electric extension cables).
•
When using your telephone for the first time, charge the battery fully
(approximately 4 hours).
You are advised to fully charge the battery (
To reduce power consumption and energy waste, when battery
is fully charged, disconnect your charger from the plug; switch off
Wi-Fi, GPS, Bluetooth or background-running applications when not
in use; reduce the backlight time, etc.
Standard charger
).
16