Getting Started; Set-Up - Alcatel One Touch 838 Tribe User Manual

Protection against theft
Your cellphone is identified by an IMEI (cellphone serial number) shown
on the packaging label and in the product's memory. We recommend that
you note the number the first time you use your cellphone by entering
*#06# and keep it in a safe place. It may be requested by the police or
your operator if your cellphone is stolen.
Disclaimer
There may be certain differences between the user manual description
and the cellphone's operation, depending on the software release of your
cellphone or specific operator services.
TCT Mobile shall not be held legally responsible for such differences, if
any, nor for their potential consequences, which responsibility shall be
borne by the operator exclusively.
Contact your network operator for service availability.
(1)
(1)
13
1

Getting started .....................

1.1

Set-up

Removing or installing the back cover
Inserting or removing the SIM card
You must insert your SIM card to make phone calls. Please power off your
phone and remove battery before inserting or removing the SIM card.
Place the SIM card with the chip facing downwards and slide it into its
housing. Make sure that it is correctly inserted. To remove the card, press
the bottom and slide it out.
Check with your network operator to make sure that your SIM card is 3V or
(1)
1.8V compatible. The old 5 Volt cards can no longer be used. Please contact
your operator.
(1)
14