Keyless Access System - Acura 2012 RL Owner's Manual

Your vehicle has a keyless access
system. When you carry the remote
with you, you can lock/unlock the
door(s), unlock the trunk, and start
the engine without using the built-in
key.
The system may not work if:
The battery of the remote is weak.
There is strong electrical current
nearby.
You carry a cell phone, a laptop
computer, or other electrical
device near the remote.
The remote is covered by metal.
A vehicle is being operated with a
transmitter nearby.
When the remote battery is dead.
When the vehicle battery is dead.
Make sure the driver always carries
the remote/built-in key set.
Protect the remote and the built-in
key from direct sunlight, high
temperature, and high humidity.
Do not drop the remote or the
built-in key, and do not set heavy
objects on them.
Keep the remote and the built-in key
away from liquids. If they get wet,
dry them immediately with a soft
cloth.
The built-in keys do not contain
batteries.
Always keep the remote and the
built-in key away from any magnetic
material.
You should have received a key
number tag with your built-in key.
You will need this key number if you
ever have to get a lost key replaced.
Use only Acura-approved key blanks.

Keyless Access System

Keys
BUILT-IN KEYS KEYLESS ACCESS
REMOTES
KEY NUMBER TAG
The following keys come with your
vehicle. Refer to page 181
separate the keys.
Built-in Key
This key is used to lock/unlock the
doors, glove box, trunk pass-through
cover, and to start the engine (after
you remove the ignition switch cover,
see page 178 ).
for how to
CONTINUED
167