Turn Signals
Right Turn
Left Turn
Light Switches
■
Manual Operation
High Beams
Flashing the high beams
Low Beams
Turns on parking, side marker,
tail, and rear license plate lights
Turns on headlights, parking,
side marker, tail, and rear
license plate lights
*1: Models with the keyless access system have an ENGINE START/STOP button
instead of an ignition switch.
The turn signals can be used when the ignition
switch is in ON w
*1
.
Rotating the light switch turns the lights on
and off, regardless of the position of the
ignition switch.
■
High beams
Push the lever forward until you hear a click.
■
Low beams
When in high beams, pull the lever back to
return to low beams.
■
Flashing the high beams
Pull the lever back, and release it.
uuOperating the Switches Around the Steering WheeluTurn Signals
1Light Switches
If you remove the key
the lights are on, a chime sounds when the driver's
door is opened.
When the lights are on, the lights on indicator in the
instrument panel will be on.
2 Lights On Indicator P. 75
Repeatedly turning the headlights on and off reduces
the life of the HID headlight bulbs.
If you sense that the level of the headlights is
abnormal, have the vehicle inspected by a dealer.
Do not leave the lights on when the engine is off
because it will cause the battery to discharge.
Continued
*1
from the ignition switch while
131