Installing a Child Seat
RIGID TYPE
Place the child seat on the vehicle
4.
seat, then attach the seat to the
lower anchors according to the
child seat maker's instructions.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
48
FLEXIBLE TYPE
Other LATCH-compatible seats
have a flexible-type connector as
shown above.
5.
Whatever type you have, follow
the child seat maker's instructions
for adjusting or tightening the fit.
TETHER STRAP HOOK
ANCHOR
Route the tether strap over the
6.
head restraint, then attach the
tether strap hook to the anchor,
making sure the strap is not
twisted.
7.
Tighten the strap according to the
seat maker's instructions.
8.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.