Table of Contents
Advertisement
Quick installation
The first time you switch on the television, a
menu appears on the screen.This menu asks
you to choose the language of the menus :
SELECT LANGUAGE
LANGUAGE
• ENGLISH
DANSK
NEDERLANDS
FINNISH
FRANCAIS
If the menu does not appear, hold down the
and
+ keys on the set for 5 seconds to bring
it up.
Use the
keys on the remote control to
choose your language then confirm with
Then select your country using the
and confirm with
If your country does not appear in the list, select ". . . "
Sorting programmes
Press the
key.The main menu is displayed.
Select INSTALL ( ), then press
The INSTALL menu appears.
INSTALL
• PICTURE
• SOUND
• FEATURES
• LANGUAGE
• INSTALL
• COUNTRY
• AUTO STORE
• MANUAL STORE
• SORT
• NAME
Using the
key, select SORT then press
The SORT menu appears.The FROM option is
activated.
Note: this menu works as follows:
• Change "FROM" (enter the current programme
number),
• "TO" (enter the new number),
• EXCHANGE numbers" (the operation is carried out).
EasyLink function
If the set is connected (by the EXT2 socket)
to a video equipped with the EasyLink
function, the language, country and channels
found are automatically transmitted to the
video recorder at the time of installation.
4
COUNTRY
AUSTRIA
BELGIUM
SWITZERLAND
GERMANY
DENMARK
keys
.
.
FROM
TO
EXCHANGE
Tuning starts automatically.
The operation takes several minutes.
A display shows the search status and the
number of programmes found.When it has
finished the menu disappears.
To exit or interrupt the search, press the
If no programmes are found, refer to the chapter
entitled Tips on p. 14.
If the transmitter or the cable network
broadcasts the automatic sort signal, the
programmes will be correctly numbered.
-
If not, the programmes found will be
numbered in descending order starting at 99,
98, 97, etc.
Use the SORT menu to renumber them.
.
Some transmitters or cable networks broadcast
their own sort parameters (region, language, etc.).
Where this is the case, make your choice using the
keys and confirm with
Select the programme you wish to renumber
using
Example: to renumber programme 78 as 2
press
Select TO (using
number with
example given, enter
Select EXCHANGE (
The message EXCHANGED appears, the
exchange takes place. In our example,
programme 78 is renumbered as 2 (and
programme 2 as 78).
.
Select the option FROM (
stages
to
programmes to renumber.
See also: EasyLink function below.
To exit from the menus, press
A message is displayed on-screen during
loading.The list of video recorder channels is
then the same as those of the set.
The EASY LINK setting in the OPTIONS menu
must be set to ON (default setting), see page 10.
.
keys or
to
.
.
key) and enter the new
keys or
to
).
key) and press
key) and repeat
as many times as there are
key.
(for the
.
.
Advertisement
Table of Contents
