Quick Installation; Program Sort; Program Name - Philips 32PW8760/05 Handbook

Quick installation

The first time you switch on the television, a
menu appears on the screen and the tuning
starts automatically.
Main •
Install •
Searching
Auto Store •
Please Wait
Prog. found 3
525,25 MHz
If the menu is not displayed, press and hold down
" "
the - and + keys on the TV set for 5
seconds to start the tuning (or MENU key
depending on versions).
All the available TV programs will be stored.

Program sort

Main menu
H
& Press key
.The
the screen.
Main •
Install •
Language •
Country •
Auto Store •
Manuel Store •
Sort •
Program •
Name •

Program name

If required, you can give a name to the
programmes and external connectors.
Note : on installation, the programs are named
automatically when an identification signal is sent.
H
& Press the
key.
é With the cursor, select the
Name.
P
@ #
" Use the
keys to select the
programme to name or rename.
4
is displayed on
00
01 BBC1
02 BBC2
03 ANGLI
Æ
04 CH4
05 CH5
Install
menu, then
This operation takes a few minutes.The display
shows the progress of the search and the
number of programs found.
At the end of the search, the menu disappears.
To exit or interrupt the search, press
program is found, consult the possible solutions p. 12.
& If the transmitter or cable network sends the
automatic sort signal, the programs will be
numbered correctly. In this case, the
installation is complete.
é If this is not the case, you need to use the
Sort menu to number the programs correctly.
Some transmitters or cable networks broadcast
their own sort parameters (region, language, etc.).
In this case, indicate your choice using the
keys and validate with .
é With the cursor, select the
Sort
followed by the
" Select the programme you want to move using
the <> cursor and press .
' Then use the <> cursor to select the new
number and validate with .
( Repeat steps " and ' for each program you
wish to renumber.
§ To quit the menus, press
' Use the
cursor to move around the name
display area (5 characters) and the <> cursor
to select the characters.
( When the name has been entered, use the
cursor to exit.The name is stored.
§ Repeat steps " to ( for each programme
you wish to name.
è To quit the menus, press
H
. If no
<>
Install
menu
menu.
d
.
H
d
.