Table of Contents
Advertisement
Fitting the Chimney Stack
The chimney stack consists of two sections.
1.
Fit the upper section (S) first. Expand the
chimney slightly to allow it to be fitted
over the brackets (1) and (2), and then
secure the chimney stack to bracket (2)
using two self tapping screws provided in
the fitting kit.
2.
Fit the lower chimney section (I) by
expanding the chimney slightly to allow it
to be fitted over the brackets (1), and the
upper chimney section and bracket (3).
3.
Ensure the bottom edge of the chimney
stack is fitted correctly into the recess
around the top of the canopy, and
secured using the two self tapping screws
as illustrated in the close-up above.
Note:
The upper (S) and lower (I) chimney
stack sections are fixed to the middle wall
bracket (3) by the natural force of the
metal, and the over lapping of the
sections by vigorously pushing against
the centre of the chimney.
15
Advertisement
Table of Contents
