Gen 1 + 2 And Gen 3 + 4 - LinPlug CronoX 3.5 User Manual

Gen 1 + 2 and Gen 3 + 4

The CronoX 3 contains 4 separate sound sources: Generator 1, 2, 3 and 4.
These can be used to produce a wide variety of sounds.
The controls for Generators 1 and 2, and Generators 3 and 4 are located on
two separate panels labeled "Gen 1 + 2" and "Gen 3 + 4". The panels can
be accessed by clicking on the respective tab at the top of the instrument.
As these two panels are essentially the same, their descriptions have been
grouped together. The only difference between Gen 1 + 2 and Gen 3 + 4 is
that the Loop Sampler option is not available in Generators 3 and 4.
Four sound source types are available within the CronoX 3: "Oscillator",
"Time Sampler", "Schrader" and "Loop Sampler". In the case of the first
Generator, we've used the term "Oscillator" to describe waveforms that are
created in real-time much as in true analog synthesizers. To change
Generators click on the menu to the right of the Generator section's label.
Each Generator also has its own On/Off switch located to the left of the
module's menu.
25
C r o n o X 3 User Guide