Installation - Haier MWM12001SCGSS User Manual

1.2 cu. ft. / 1000 watt microwave oven convection, grill, and sensor cooking
Table of Contents

Advertisement

Available languages

Available languages

COUNTERTOP INSTALLATION
Remove all packing material and accessories. Examine the oven for any
damage, such as dents or broken door. Do not install if oven is damaged.
Cabinet: Remove any protective film found on the microwave oven cabinet
surface. Do not remove the light brown Mica cover that is attached to the oven
cavity to protect the magnetron.

Installation

1. Select a level surface that provides enough open space for the intake and/or
outlet vents. A minimum clearance of 3.0 inches (7.5cm) is required between
the oven and any adjacent walls. One side must be open.
(1) Leave a minimum clearance of 12 inches (30cm) above the oven.
(2) Do not remove the legs from the bottom of the oven.
(3) Blocking the intake and/or outlet openings can damage the oven.
(4) Place the oven as far away from radios/TV as possible. Operation of
microwave oven may cause interference to your radio/TV reception.
2. Plug your oven into a standard household outlet. Be sure the voltage and the
frequency is the same as the voltage and the frequency on the rating label.
WARNING
WARNING: Do not install oven over a range cooktop or other heat-
producing appliance. If installed near or over a heat source, the
oven could be damaged and the warranty would be void.
English
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents