Remote Control - Haier L19C1120 Owner's Manual

NOTE
 The wall mount bracket and the
screws are not included.
Please make sure to connect the power plug
to the wall outlet socket after connecting the
TV to the power cord!
1. Install the base stand; place the TV on
a solid surface.
Ensure that the TV is placed in a position
to allow free flow of air. Do not cover the
ventilation openings on the back cover.
To prevent any unsafe situations, no naked
flame sources, such as lighted candles,
should be placed on or in the vicinity.
Avoid heat, direct sunlight and exposure to
rain or water. The equipment shall not be
exposed to dripping or splashing.
2. Connect the antenna cable or CATV cable
to the aerial socket ANT IN 75 Ω at the
back of the TV set.

3. Remote control:

Remove the cover of the battery
compartment. Insert the included 2
batteries (Type AAA 1.5V).
4. Power:
Insert the power cord in the wall socket
with AC power supply. There is an LED
indicataor on the front panel. If the LED
Min
1 m
color is Blue, it means the TV set is on. If
the LED color is Red, it means the TV set
is in standby mode.
5. Turn the TV on:
Press the Power key on the remote control
or the side panel control buttons. The TV
will turn on within a few seconds.
10
Power Key
Power
Video Comp PC/HDMI TV