Electrical Connections; Grounding Instructions; Power Interruptions - Haier HLT23E User Manual

Top load clothes washer
Hide thumbs Also See for HLT23E:
Table of Contents

Advertisement

Available languages

Available languages

Electrical Connections

Grounding Instructions

This appliance must be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing an escape wire for
the electric current. This appliance is equipped with a cord having a grounding
wire with a grounded plug. The plug must be inserted into an outlet that is
properly installed and grounded.
• Improper use of the plug can result in a risk of electric shock.
• Consult a qualified electrician or service person if the grounding
instructions are not completely understood or if doubt exists as to
whether the appliance is properly grounded.
Wiring Requirements:
• The washer must be plugged into at least 15 AMP 115-120 VOLT,
60 HZ GROUNDED OUTLET.
Note: Where a standard two-prong
outlet is encountered,
it is the personal responsibility
and obligation of the
consumer to have it replaced
with a properly grounded
three-prong outlet.
Extension Cords:
We do not recommend that you use an extension cord.

Power Interruptions

Occasionally there may be power interruptions due to thunderstorms or other
causes. Remove the power cord from AC outlet when a power outage occurs.
When power has been restored re-plug power cord to AC outlet. If outage is
for a prolonged period, clean washer before using it again.
X
English
18

Advertisement

Table of Contents
loading

Table of Contents