Gigabyte 6VTXE-A User Manual page 54

6VTXE(-A) Motherboard
IDE2 Conductor Cable
Auto Will be automatically detected by BIOS (Default Value).
ATA66/100 Set IDE2 Conductor Cable to ATA66/100 (Please make sure your
IDE device and cable is compatible with ATA66/100)
ATA33 Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE
device and cable is compatible with ATA33).
On Board FDC
Auto Set On Board FDC is Auto (Default Value).
Disabled Disabled On Board FDC
Enabled Enabled On Board FDC
Onboard Serial Port 1
Auto BIOS will automatically setup the port 1 address (Default Value).
3F8/COM1 Enable onboard Serial port 1 and address is 3F8.
2F8/COM2 Enable onboard Serial port 1 and address is 2F8.
3E8/COM3 Enable onboard Serial port 1 and address is 3E8.
2E8/COM4 Enable onboard Serial port 1 and address is 2E8.
Disabled Disable onboard Serial port 1.
Onboard Serial Port 2
Auto BIOS will automatically setup the port 2 address (Default Value).
3F8/COM1 Enable onboard Serial port 2 and address is 3F8.
2F8/COM2 Enable onboard Serial port 2 and address is 2F8.
3E8/COM3 Enable onboard Serial port 2 and address is 3E8.
2E8/COM4 Enable onboard Serial port 2 and address is 2E8.
Disabled Disable onboard Serial port 2.
Serial Port 2 Mode
ASKIR Set onboard I/O chip Serial Port 2 to ASKIR Mode.
IrDA Set onboard I/O chip Serial Port 2 to IrDA Mode.
Normal Set onboard I/O chip Serial Port 2 to Normal Mode. (Default Value)
Duplex Mode
IR Function Duplex Half.
Half Duplex
Disabled this function. (Default Value)
N/A
IR Function Duplex Full.
Full Duplex
47