E.
Adapetc SATA RAID Driver Installation
Installation Procedures:
1. The CD auto run program starts, Double click on "Adapyec SATA RAID Driver" to start the
installation.
2. Double click "Driver" folder.
3. Refer to yor operating systsem, select the desired folder to install the RAID driver.
4. Copy the folder to a floppy diskette. When installing, insert the dsikette into floppy drive.
Note: User must enable "SATA RAID" function in the CMOS "I/O Device Configuration"
setup meun before installing Adaptec RAID driver.
Auto Run windows
1. Click "Adaptec SATA RAID
Driver" item.
(1)
1. Click the folder.
(3)
SATA RAID Driver
1. Click Driver folder.
(2)
Operating System Selection
Refer to yor operating systsem,
select the desired folder to install
the RAID driver.
(4)
6 1
Driver Installation