Table of Contents
Advertisement
Set User Password
You can only enter but do not have the right to change the options of the setup menus. When
you select this function, the following message will appear at the center of the screen to assist
you in creating a password.
Type the password up to 6 characters in lengh and press <Enter>. The password typed now
will clear any previously entered password from the CMOS memory. You will be asked to
confirm the entered password. Type the password again and press <Enter>. You may also
press <Esc> to abort the selection and not enter a specified password.
Password on boot
Password entering will be required when system on boot.
Requries entering password when system on boot.
Enabled
Disable this function. (Default value)
Disabled
Fixed disk boot sector
Write protects boot sector on harddisk to protect against virus.
Write Protect
Set the fixed disk boot sector at Normal state. (Default value)
Normal
Diskette access
Control access to diskette drives.
Requires user's password to access floppy drives.
User
Requires supervisor's password to access floppy drives. (Default value)
Supervisor
4 3
BIOS Setup
Advertisement
Table of Contents
