Selecting Picture Mode - Gold Vision GV-P42V User Manual

1

Selecting Picture Mode

• Press the [PICTURE MODE] on the
Remote Control.
• Pressing the [PICTURE MODE] first time
will display the current PICTURE MODE.
PICTURE
MODE
Each Press of the Button Will Select
2
One of Four Picture Modes.
PICTURE
MODE
Normal
* Normal :
* Dynamic: For a clear-cut image emphasizing high contrast
* Cinema:
* User:
3
Menu on the Screen Will Disappear.
• After selecting a desired Picture mode, the
menu on the screen will disappear.
• Normal, Dynamic, and Cinema Modes are
factory preset values.
If you want to customize the Picture modes,
refer to the following page.
NOTES:
1) Normal, Dynamic, and Cinema Modes are factory preset values.
2) When adjusting sub-menus while you are in Normal, Dynamic,
and Cinema Modes, the Picture Mode will be automatically
converted to User Mode, and the adjustments will be made.
3) Pressing of the [Initialize] button in the [Utility] Menu will allow
for the Brightness, Contrast, etc. to return to the factory preset
values.
Selecting Picture Mode
• Each time you press the button, a
different Picture mode appears. The
sequence used is as follows:
Dynamic Cinema
For a highly defined image in a normally bright
room
for sports viewing
For a movie
Allows the user to customize settings as desired.
Selecting Picture
• Select the Picture mode
that is appropriately set
depending on the kinds
of pictures, and enjoy
them.
INPUT
SELECT
User
DISPLAY
ZOOM-
MENU
VOL
PICTURE
MODE
FREEZE
SOUND MUTE
MODE
Mode
POWER
ZOOM+
VOL
SCREEN
MODE
SLEEP
31