Picture-In-Picture(Option); Timer; Sleep - Daewoo KR29M2 Instruction Manual

PICTURE-IN-PICTURE (OPTION)
To Watch a external source as a sub-picture
Press the PinP button to display a sub-picture.
Press the sub button repeatedly to select the input for the sub
picture. A TV picture will appear repeatedly.
(AV1 AV2 AV1
To Swap the main and sub-picture
Press the SWAP button when a picture-in-picture is displayed.
The main picture and sub-picture are swapped.
Press the SWAP button again to swap again.
To Select the Size of the sub-picture
Press the SIZE button when a sub-picture is displayed.
The sub-picture will be smaller. To return to be normal size, press
the SIZE button again.
To Change the Position of the sub-picture
Press the POSITION button repeatedly when a sub-picture is
displayed.
The display position of the sub-picture will changed in order
PIP mode.
In the Menu, Select Timer menu.
SETTING THE CLOCK
Press the RIGHT button on the CLOCK line.
Set the hours and minutes with the UP/DOWN buttons.
The clock will start.
Note that if you turn the TV off with MAIN POWER button, the
clock setting is lost and must be reset if necessary.
SETTING THE WAKE UP TIME
Set Wake up time in the same way as the SETTING THE
CLOCK above.
Set Timer :Yes or
When Timer is "Yes", the function is enabled.
Set Wake up Pr using UP/DOWN button.
When Wake up time is operative, the set will switch on to this
programme number at the set time.
By pressing the SLEEP button repeatedly, you can select one of
the following settings:
00:00 00:20 00:40
The set will be turned off after the time you set.
... )

TIMER

:No with the UP/DOWN button .

SLEEP

01:00 01:20
to
01:40 02:00
10