Selecting Input Signal - KHIND KPP-4200D User Manual

Selecting INPUT SIGNAL

INPUT SIGNAL
• Used to select
INPUT signal of
external device
connected to the
PDP.
INPUT
POWER
SELECT
DISPLAY
ZOOM- ZOOM+
MENU
VOL VOL
PICTURE SCREEN
MODE MODE
FREEZE
SOUND MUTE SLEEP
MODE
44
1
Press the INPUT SELECT Button.
• Press the [INPUT SELECT] button on the Remote
INPUT
Control or the PDP Display to select [COMPONENT 1]
SELECT
or [COMPONENT 2].
• Each time you press the [input select] button, a different
screen mode appears. The sequence used is as
follows: COMPONENT 1 --> COMPONENT 2 -->
VIDEO 1 --> VIDEO 2 --> PC
Component1
NOTES:
* If an external device is not connected or INPUT signal is not
applied, Warning Message ("No Signal") would be displayed.
* In this case, check if external device is connected and/or
terminal connection is properly done.
PC
Component2 Video1
PC Video2