Table of Contents
Advertisement
Remote Control
The number in (
) indicates the page in which
*
the function of each button is explained in detail.
44
Input Select button
Used to select a desired input.
Every press of the button cycles
through the five different modes:
Video 1 --> Video 2 --> PC -->
Component 1 --> Component 2
38
ZOOM button
Used to zoom the screen. To enlarge,
press the (+) button, and to return to
the previous condition, press the (-)
button. (ZOOM Mode: Zoom 0~20)
32
Menu Select button
Select Menu by pressing
(Down), (Left), (Right) buttons.
31
Screen Select button
Every press of the button cycles through
the four different modes: Normal -->
Dynamic --> Cinema --> User.
41
Sound Mode button
Every press of the button cycles through
the five different modes: Normal -->
Movie --> Music --> News --> User.
Mute button
Mutes sound.
When Using Remote Control:
•
Be sure not to allow the Remote Control to be dropped or become wet.
•
Keep it away from hot or moist locations.
INPUT
SELECT
DISPLAY
ZOOM-
MENU
VOL
(Up),
PICTURE
MODE
FREEZE
SOUND
MUTE
MODE
Note
• Use two "AAA" batteries.
• Be sure to use replacement batteries of the
same type as the original ones.
• The life of a battery depends on how much
it has been used.
POWER
Power button
Pressing the Power button of the Monitor
allows the Display to be on standby. (Red
light is shown in the Remote Control
Sensor.) At this time, if you press the Power
button of the Remote Control, the Display is
turned ON (Green light in the Sensor).
Display button
ZOOM+
Indicates the current state and resolution.
Menu button
Used to display a desired menu.
Volume button
VOL
Adjusts the volume.
Aspect Ratio
Adjusts the size of the screen
SCREEN
MODE
(normal, 16:9, etc.)
40
Still
SLEEP
Used to view a still picture during
the watching of moving images.
(Sound can be heard.)
Sleep Timer
Each time you press this button, a different
input mode appears.
The sequence is as follows:
15 Min. --> 30 Min. --> 60 Min. --> 90 Min. --> 120 Min. --> OFF
After the time is selected, it automatically
becomes a stand-by state.
Installing the Batteries in your Remote Control:
•
To remove the cover, slide it outwards while pressing it down.
•
Place two batteries in the remote control by properly orienting
them, then close the cover.
16
46
42
32
34
49
13
Advertisement
Table of Contents
