Features; Specifications; Frequency Response & Polar Pattern; Service - Nady Systems Center Stage Dynamic Microphone Manual

FEATURES

• Advanced high-output neodymium cartridge provides maximum clarity and definition, even in noisy
environments
• Unidirectional cardioid pattern reduces feedback
• Special-design internal cartridge mount for lowest handling noise and quiet performance
• Withstands highest sound pressure levels without overload or distortion
• Rugged, all-metal construction
• External ON-OFF switch on handle
• Includes 20 ft. microphone cable

SPECIFICATIONS

ELEMENT: Moving Coil Dynamic Neodymium
POLAR PATTERN: Uni-directional Cardioid
FREQUENCY RESPONSE: 50Hz -15KHz (-3dB)
SENSITIVITY (@1kHz, 74dB S.P.L.): -55dB V/Pa
(4.5mV/Pa)
IMPEDANCE: 600 ohms
MAXIMUM S.P.L. (THD d1% 1KHz): 120dB
CONNECTOR: XLR balanced
FREQUENCY RESPONSE & POLAR PATTERN
(dBV/Pa)
-60
-70
-80
-90
-100
-110
-120
30 50 100

SERVICE

(U.S.) Should your Nady Center Stage™ require service, please contact the Nady Customer Service
Department via telephone: (510) 652-2411 or e-mail: service@nady.com.
(INTERNATIONAL) For service, please contact the Nady distributor in your country through the dealer
from whom you purchased this product. The warranty card supplied with this system provides valuable
warranty and service information. Store it in a safe place for future reference. Do not attempt to service
this unit yourself as it will void your warranty.
NADY SYSTEMS, Inc.
6701 Shellmound Street • Emeryville, CA 94608
Tel: 510.652.2411 • Fax: 510.652.5075 • www.nady.com
200 300 500 1k 2k 3k
MIC CABLE: 20' (6m) 3-pin XLR to 1/4" TS
DIMENSIONS (LENGTH x DIAMETER): 7" x 2.1"
(180mm x 52mm)
WEIGHT: 9.2 oz (260 g)
MATERIAL: Zinc alloy Die-cast zinc
BALLSCREEN: Steel mesh
5k 10k 20kHz