S137W- BG/D(LENCO)
0.10.6 10:48 AM
REMOTE CONTROL OPERATION RANGE
7m
˘ ` 13
1. Any object between the remote control and VCP
will block the path of beam when it is being used.
Dark walls, direct sunshine or very bright
(incandescent) light will reduce the remote control
sensitivity.
2. Hold the remote control within an angle range of
about 30° from either side of the remote sensor
center as shown.
30° 30°
3. When the remote control is vertical to the remote
Sensor, it will work within about 23 feet (7m) from
the VCP.
4. Point the front of the remote control directly at the
front of the VCP.
13